Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the air filter on the Renault Twingo 2

Model: Renault Twingo Twingo 2 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Air filter

See other generations:
Video tutorial

This guide will explain the steps to independently replace the air filter of the Renault Twingo model 2. Start by removing the cover of the protection box using a socket and a 20 mm Torx screwdriver. Once the cover is removed, you can access the filter and take it out. Next, clean the filter housing and then insert the new filter.

After inserting the filter, refit the cover of the box and secure it with the screws previously removed. Close the bonnet and test the new filter by starting the engine.


Updated on 19 September 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter on a Renault Twingo 1
How to Replace the Air Filter on a Renault Twingo 1
Renault Twingo (1993-2007 / Twingo 1) If you want to replace the air filter on your Renault Twingo Mk1 yourself but don't know how, don't worry because this guide will provide all the ins…
How to Change the Cabin Air Filter in a Renault Twingo
How to Change the Cabin Air Filter in a Renault Twingo
Renault Twingo (2014-2024 / Twingo III, Twingo 3) To change the cabin air filter in a third-generation Renault Twingo, fully slide the passenger seat back and lower the backrest to work with more spa…
Replace Air Filter on Renault Twingo
Replace Air Filter on Renault Twingo
Renault Twingo (1993-2007 / Twingo 1) Is the air filter damaged? Let's remove it on the Twingo. Open the car door, pull up the engine compartment release lever located at the bottom left …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos