Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace a bulb on a Renault Clio IV

Model: Renault Clio Clio IV, MK 4, Clio 4 - Years 2012-2019
Part: Light bulb

This video shows how to replace a bulb on a Renault Clio IV: it is a very simple task that you can perform by lifting the bonnet and reaching behind the headlamp unit. Simply disconnect the electrical connector, remove the rubber cap protecting the bulb, and then take out the bulb you need from inside the headlamp. Each bulb is held in place by a sort of spring metal protection that you will need to remove. Remember to never touch the new bulb with bare hands, as this will significantly reduce its lifespan; it is better to use a pair of disposable gloves. The working space is limited, but it can be done.

Updated on 19 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Before you begin, open the front bonnet of your Renault Clio. Start by prising off and removing the inner cover of the blown bulb. Next, disconnect t…
How to Replace the Front Bulb on the Renault Clio
How to Replace the Front Bulb on the Renault Clio
Renault Clio (2012-2019 / Clio IV, MK 4, Clio 4) Today, you will see how to extract and replace the front headlamp bulb on the fourth series Renault Clio. Specifically, you will deal with the dipped…
How to Replace the Front Headlight Bulb on a Renault Clio
How to Replace the Front Headlight Bulb on a Renault Clio
Renault Clio (1998-2005 / Clio 2, MK 2) Before you can start, open the front bonnet of your Renault Clio. Begin by unclipping and removing the rear cover of the blown bulb. Next, disconnect…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos