Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Key Battery on a Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Key

See other generations:
Video tutorial

In this article, we will see how to replace the battery in the key of a Renault Twingo 1, using the video as a guide. The procedure requires no tools and takes less than 1 minute.

To replace the key battery, first take the key and observe the side with the arrows. Turn it over and, with the blade of the key facing down, push the key cover upwards.

Once opened, completely remove the cover to access the battery. Extract the old battery and replace it with a new one. After replacing it, close the key by pressing down with your fingers to secure the locking pins.

The operation is now complete.


Updated on 28 September 2026 by ScegliAuto


Related tutorials

Renault Twingo (1993-2007 / Twingo 1) How to replace the key battery on a Renault Twingo? In this video, see how to properly perform the replacement: take your ignition key and use a scre…
Renault Twingo (2007-2014 / Twingo 2) This tutorial shows you how to replace the exhausted battery of a Renault Twingo 2 with a 1.2 petrol engine. First, open the bonnet and secure it wit…
Renault Twingo (1993-2007 / Twingo 1) Follow these instructions to remove and replace the engine battery of the Renault Twingo 1.2. First, open the bonnet of the vehicle and disconnect bo…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos