Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Scenic 4

Model: Renault Scenic Scenic IV, Scenic 4, MK IV, MK 4 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Service warning light

See other generations:
Video tutorial

Resetting the service light on a 2017 Renault Scenic 4 is very simple. This operation must be performed after each service.

First, switch on the ignition and press the arrow button to open the car menu and select "Range and Service". Hold it until the new menu opens. Next, press and hold the OK button for a few seconds, and once the light starts flashing, release the button.

Press the OK button again and hold it until the lights flash again; at that point, once you release the button, the reset will have been completed. Switch off the ignition and turn it back on to verify that the reset was successful.


Updated on 29 September 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Scenic - Grand Scenic
How to Reset the Service Light on a Renault Scenic - Grand Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) In this short and simple guide, we will see the procedure to reset the service light on a Renault Scenic and Grand Scenic. First, get inside the vehi…
How to Reset the Service Light on the Renault Scenic 4?
How to Reset the Service Light on the Renault Scenic 4?
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) To reset the Service light on the Renault Scenic 4, turn on the instrument cluster by rotating the ignition key in the ignition switch. Once the disp…
How to Reset the Service Light on a Renault Scenic
How to Reset the Service Light on a Renault Scenic
Renault Scenic (2016-2022 / Scenic IV, Scenic 4, MK IV, MK 4) To reset the service light on a Renault Scenic, press the Start button without starting the engine to turn on the instrument panel. Use the controls …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos