Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure warning light in the Renault Kadjar?

Model: Renault Kadjar MK 1 - Years 2015-2022
Part:

In this tutorial we can see how to reset the tire pressure warning light in the Renault Kadjar, an extremely simple and quick operation, to be carried out only once the correct pressure of each tire has been restored following the instructions in the manual. First of all, let's go inside the passenger compartment, then turn on the instrument panel and, using the directional arrows located at the end of the right control lever, reach the screen of the warning in question. Once this is done, hold down the down arrow button for about 10 seconds, or however long it takes for the warning light to disappear properly.

Posted on 11 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tire pressure warning light on the Renault Kadjar
How to reset the tire pressure warning light on the Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) The following steps will allow us to reset the tire pressure monitoring system (TPMS) light on the Renault Kadjar; before performing the reset, it is…
How do you reset the tire pressure warning light on the Renault Kadjar?
How do you reset the tire pressure warning light on the Renault Kadjar?
Renault Kadjar (2015-2022 / MK 1) The reset of the tire pressure warning light that appears on the instrument panel of the Renault Kadjar is done by inflating the tires to the correct…
How to Reset the Tyre Pressure Light on a 2019 Renault Kadjar
How to Reset the Tyre Pressure Light on a 2019 Renault Kadjar
Renault Kadjar (2015-2022 / MK 1) In this guide, you will learn how to correctly perform the manual reset of the tyre pressure light on your 2019 Renault Kadjar. First, enter the cabi…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos