Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on a Renault Twingo

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Timing belt

See other generations:
This video is currently unavailable

To replace the timing belt on a Renault Twingo, lift the car using a jack or ramp so that the front right wheel can be completely removed along with the corresponding wheel arch. Once these two components are removed, you will be able to access the tensioner pulley, which can be removed by loosening the belt itself: the old belt can now be slid out of its housing to insert the new one. Once the new belt is in place, tension it and check that everything functions correctly.


Updated on 30 September 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Renault Twingo 1.2
Replacement of the timing belt of the Renault Twingo 1.2
Renault Twingo (1993-2007 / Twingo 1) Today's information will allow us to dismantle and replace the timing belt of the Renault Twingo 1.2. First, we lift the vehicle and begin to dismant…
Replacing the Timing Belt on a Renault Twingo 1.2
Replacing the Timing Belt on a Renault Twingo 1.2
Renault Twingo (1993-2007 / Twingo 1) Below are the main instructions to remove and replace the timing belt on a Renault Twingo 1.2. First, raise the vehicle and remove the right front wh…
Replacing the Timing Belt on the Twingo 1.2 Version 1
Replacing the Timing Belt on the Twingo 1.2 Version 1
Renault Twingo (1993-2007 / Twingo 1) This video shows how to replace the timing belt on the Renault Twingo 1.2 Version 1. The engine must be set to the base position, that is, at the top…

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos