Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Timing Belt on a Renault Twingo 1.2

Model: Renault Twingo Twingo 1 - Years: 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004
Part: Timing belt

See other generations:
Video tutorial

Below are the main instructions to remove and replace the timing belt on a Renault Twingo 1.2. First, raise the vehicle and remove the right front wheel; then, remove the alternator belt by unscrewing its bolt, as shown in the video. At this point, remove the bolts from the engine mount and take it out; once the timing cover is removed, you can access the belt, taking the necessary references for the replacement, following the video tutorial to the end!


Updated on 1 September 2026 by ScegliAuto


Related tutorials

Replacement of the timing belt of the Renault Twingo 1.2
Replacement of the timing belt of the Renault Twingo 1.2
Renault Twingo (1993-2007 / Twingo 1) Today's information will allow us to dismantle and replace the timing belt of the Renault Twingo 1.2. First, we lift the vehicle and begin to dismant…
How to Replace the Wiper Blades on a Renault Twingo 2
How to Replace the Wiper Blades on a Renault Twingo 2
Renault Twingo (2007-2014 / Twingo 2) Replacing the front and rear wiper blades is a very simple task, and the steps are similar for many vehicles, including Renaults. Today, you will lea…
Replacing the External Wing Mirror on a Renault Twingo
Replacing the External Wing Mirror on a Renault Twingo
Renault Twingo (2007-2014 / Twingo 2) Today's guide will show you how to remove and replace the external wing mirror on a Renault Twingo. First, open the front door and begin by removing …

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos