Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Air Filter in No Time

Model: Renault Clio MK 3, Clio 3, Clio III - Years 2005-2013
Part: Cabin air filter

First, purchase a new pollen filter that is identical to the original or compatible with your car. The pollen filter purifies the air in the cabin and is located under the glove compartment on the passenger side. The first step in replacing it is to unclip the plastic hooks that secure the filter cover by simply moving them. Once the filter cover is removed, take out the filter by pulling it out carefully to avoid dust dispersal. Place a cloth on the floor to catch any dirt. Insert the new filter into its housing and close the cover with the hooks.

Updated on 2 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Cabin Filter on a Renault Clio
How to Change the Cabin Filter on a Renault Clio
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) Changing a worn cabin filter? Let's look at replacing the cabin air filter on a Renault Clio. Disconnect the plastic cover of the air filter housing …
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Renault Clio (1998-2005 / Clio 2, MK 2) The cabin air filter is located on the passenger side, just below the windscreen: open the front bonnet, pull the seal from the rear edge, unclip the…
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Renault Clio (2005-2013 / MK 3, Clio 3, Clio III) The cabin air filter is located behind the centre tunnel console and does not require the removal of any covers for replacement; access the cabin fro…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos