Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Renault Clio

Model: Renault Clio Clio 3, MK 3, Clio III - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013
Part: Service warning light

See other generations:
Video tutorial

To reset the service light on a Renault Clio, turn on the ignition without starting the engine, press the upper button at the right end of the wiper control lever until the message "hacer revision" appears; once that message appears, hold down the upper button at the right end of the wiper control lever until the message on the display stops flashing, the new mileage for the next service will appear and the spanner warning light will turn off. Now you can turn off the ignition, turn it back on, and you will notice that the spanner warning light is off. If you press the button at the right end of the wiper control lever until the message "revision" appears, you will see that the new mileage has been saved.

Finally, you can turn off the ignition and the reset is complete.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on a Renault Clio
How to Reset the Service Light on a Renault Clio
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) .. This tutorial shows how to reset the service light on a Renault Clio 4, a very simple and quick operation. Before proceeding,.. …
How to Reset the Oil Service on a Renault Clio?
How to Reset the Oil Service on a Renault Clio?
Renault Clio (2005-2013 / Clio 3, MK 3, Clio III) In this tutorial, see how to reset the oil service on a Renault Clio, a very simple and quick operation to perform only after completing the required…
How to reset the oil service light on the Renault Clio?
How to reset the oil service light on the Renault Clio?
Renault Clio (2012-2019 / Clio IV, Clio 4, MK 4) In this tutorial, you will learn how to reset the oil service light on the Renault Clio, a very simple and quick operation to be performed only after…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos