Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the fuse box of the Renault Master 2015 located?

Model: Renault Master MK 3 - Years 2010-2023
Part: Fuse box

If you are curious to discover the steps to follow to identify the fuses of your 2015 Renault Master, then all you have to do is read carefully the following guide and follow the steps dedicated to you. First of all, make sure you have parked the vehicle on a flat surface, then turn it off completely and lift the front hood to access the engine compartment. At this point, locate the fuse box on the right side and remove the protective cover to access the fuses.

Posted on 7 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuse boxes of the Renault Master located?
Where are the fuse boxes of the Renault Master located?
Renault Master (2010-2023 / MK 3) Inside the Renault Master MK3 model, two fuse boxes are installed. The first fuse box is located inside the front hood, specifically next to the batt…
Where is the passenger compartment fuse box on the Renault Master 3
Where is the passenger compartment fuse box on the Renault Master 3
Renault Master (2010-2023 / MK 3) The fuse box in the passenger compartment of the Renault Master is really close at hand - as it should be on a commercial vehicle - because it is loc…
What is the fuse layout of the Renault Master van?
What is the fuse layout of the Renault Master van?
Renault Master (2010-2023 / MK 3) In this video, we can see the position of the fuse boxes of the Renault Master van and their respective diagrams, useful in case we need to check the…

Other guides you may be interested in

    Frequently Asked Questions

    • Master 2010-2023 - Where is the indicator relay located in the Renault Master? Read answer

How to Remove the Front Headlamp of a Renault Clio

Remove the front headlamp of a Renault Clio. Open the bonnet by pulling the release lever and secure it; using a battery-powered screwdriver or a screwdriver, undo the securing bolts located at the top of the bumper. Once the screws at the top are undone, remove the splash guard bolts and finally remove the bolts at the bottom of the bumper. Carefully detach the bumper from the body of the vehicle. At this point, disconnect the headlamps from the body (undo the securing bolts) and the bulb holder from the headlamp. Fit the new headlamp with new bulbs if damaged (always ensure the correct type and size) and insert the headlamp into its housing. Finally, refit the front bumper and tighten the bolts.

Watch the video!


by ScegliAuto

More videos