Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage compartment and replace the pollen filter of the Renault Talisman

Model: Renault Talisman MK 1 - Years 2015-2023
Part: Glove compartment

The following steps will show us how to disassemble the glove box and replace the cabin air filter of the Renault Talisman. First, we open the front passenger side door and begin to remove the plastic cover on the side of the glove box; then we unscrew the fixing screws of the glove box found on the sides, disconnecting the connector found at the top, as shown in the video. Once the glove box is removed, we can proceed with the replacement of the pollen filter, removing the plastic cover and replacing the cartridge with the new one!

Posted on 8 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin air filter of the Renault Talisman
How to replace the cabin air filter of the Renault Talisman
Renault Talisman (2015-2023 / MK 1) In today's video tutorial, we will see the instructions that will allow us to disassemble and replace the cabin air filter (or pollen filter) of the …
How to replace the diesel filter on Renault Talisman dCi - Samsung SM6
How to replace the diesel filter on Renault Talisman dCi - Samsung SM6
Renault Talisman (2015-2023 / MK 1) Let's see in this guide how to disassemble and replace the diesel filter of the Renault Talisman dCi, but also of the Samsung SM6. First of all we ra…
How to replace the gear knob of the Renault Talisman
How to replace the gear knob of the Renault Talisman
Renault Talisman (2015-2023 / MK 1) If you own a Renault Talisman and want to replace the gear knob yourself, all you have to do is follow these steps. First of all, you need to purchas…

Other guides you may be interested in

Removing and Replacing a Front Headlamp of a Lancia Lybra

This video explains how to remove and replace the front headlamp and its bulbs on a Lancia Lybra. The car has a very simple and quick headlamp removal system. To start, lift the bonnet, reach into the engine bay, and (specifically at the rear of the headlamp) unclip the metal tab that secures the headlamp, then use a screwdriver to undo the few Torx screws. After removing the screws, unclip the headlamp and pull it out from the bumper, disconnect the power connectors, and replace any damaged bulbs or the entire unit. The reassembly phase is very straightforward: insert the headlamp into the bumper housing as shown in the video, secure the metal tab until the headlamp clicks into place (screw in the securing screws). Finally, test the correct operation of the lights.

Watch the video!


by ScegliAuto

More videos