Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Sunglasses Holder in the Renault Scenic 2?

Model: Renault Scenic Scenic 2, MK 2 - Years: 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Checks and maintenance

See other generations:
Video tutorial

The task specified relates to the removal of an internal component of the vehicle, in this case, the internal handle. It follows the same rules and uses the same tools and steps as shown in the accompanying video.

When removing the sunglasses holder from the Renault Scenic 2, after removing the fixing screws, it is crucial to be careful when extracting it from its housing within the trim. Therefore, use specific plastic levers that are appropriately shaped, as demonstrated in the video.


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to Change the Front Headlight Bulb on a Renault Scenic 2
Renault Scenic (2003-2009 / Scenic 2, MK 2) To complete the replacement of the front headlight bulb on your Renault Scenic second series, follow the procedure outlined in this mini guide. First…
Replacing a Indicator Bulb on a Renault Scenic
Replacing a Indicator Bulb on a Renault Scenic
Renault Scenic (2009-2015 / MK III, Scenic III, Scenic 3, MK 3) Follow these steps to replace the indicator bulb on a Renault Scenic. Open the bonnet of the engine compartment and secure it. Remove the black plast…
Removing the Front Headlamp Bulb from a Renault Scenic
Removing the Front Headlamp Bulb from a Renault Scenic
Renault Scenic (2003-2009 / Scenic 2, MK 2) Let's see how to remove the front headlamp bulb from a Renault Scenic. Lift the front bonnet of the car and locate the front headlamp bulbs. Find the…

    Frequently Asked Questions

    • Scenic 2016-2022 - Where is the Renault Scenic parking brake fuse located? Read answer

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos