Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the car radio in the Renault Master van?

Model: Renault Master MK 3 - Years 2010-2023
Part: Car stereo

In this tutorial we can see how to disassemble the car radio in the Renault Master van, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then remove the small storage compartment above the car radio and, pulling towards us, detach the outer plastic frame. Next, unscrew the four fixing screws using a Torx key, detach the lower panel, unscrew the two additional screws, and remove the outer frame. At this point, we can remove the car radio from the housing, disconnect the connectors, and install any replacement.

Posted on 10 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to recover the unlock code for the Renault Master van's radio?
How to recover the unlock code for the Renault Master van's radio?
Renault Master (2010-2023 / MK 3) In this tutorial, we can see how to retrieve the unlock code for the Renault Master van's radio, which must be entered, for example, after replacing …
How to remove the radio from the Renault Master
How to remove the radio from the Renault Master
Renault Master (1997-2010 / MK 2) Today we will explain how to remove the radio from the Renault Master model mk2. The steps to follow are simple and quick. The first step is to inser…
How do you get the Renault Master radio unlock code?
How do you get the Renault Master radio unlock code?
Renault Master (2010-2023 / MK 3) In order to obtain the Renault Master car radio unlock code, the device must be completely disassembled, removing it from inside its housing: once th…

How to Remove the Fuel Pump from the Tank on an Opel Astra

How to remove the fuel pump from the tank on an Opel Astra? First, disconnect the battery cables. Next, remove the rear seat cushions from the car. Use a socket spanner to unscrew the securing screws of the metal cap (located on the metal panel), then remove it from its seat. Use absorbent paper around the perimeter to soak up any liquid leaks. Unscrew the large securing bolt of the fuel pump (if present on the model), disconnect the power connectors and the liquid circulation pipes. Extract the floating fuel pump from its seat along with any attached parts. Finally, refit a new piece.

Watch the video!


by ScegliAuto

More videos