Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the radio from the Renault Master

Model: Renault Master MK 2 - Years 1997-2010
Part: Car stereo

Today we will explain how to remove the radio from the Renault Master model mk2. The steps to follow are simple and quick. The first step is to insert screwdrivers into the four holes at the top and bottom on both the left and right sides; The second step is to pull the radio outwards. The third step is to remove the radio from its housing and disconnect the radio connector and antenna; The radio code to unlock the radio after replacing the battery is located on the sides of the radio.

Posted on 26 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Obtain the Unlock Code for the Renault Master Radio?
How to Obtain the Unlock Code for the Renault Master Radio?
Renault Master (2010-2023 / MK 3) To obtain the unlock code for the Renault Master radio, you need to completely dismantle the device, removing it from its housing: once the radio is …
How to Replace the Radio in the Renault Master?
How to Replace the Radio in the Renault Master?
Renault Master (2010-2023 / MK 3) You can replace the radio in the Renault Master by prying with an object like a screwdriver to detach the central dashboard trim panel: once this pan…
Where is the fuse for the radio of the Renault Master located?
Where is the fuse for the radio of the Renault Master located?
Renault Master (2010-2023 / MK 3) The fuse of the Renault Master's radio is located inside the fuse box located behind the driver's side glove compartment. In case of radio malfunctio…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos