Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the driver's seat in the Renault Zoe?

Model: Renault Zoe MK 1 - Years 2013-2024
Part: Seat

In this tutorial we can see how to disassemble the driver's seat in the Renault Zoe, an extremely simple and fast operation. Before doing this, we open the hood and disconnect the negative terminal of the battery, in order to avoid accidental activation of the airbags. We start by opening both left doors, then we move the seat forward and, with a Torx T40 key, we unscrew both rear bolts of the brackets. We then move the seat back, unscrew the front bolts and unhook the belt. At this point, all that remains is to disconnect the yellow connector and remove the seat from the cabin.

Posted on 8 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the range indicator of the Renault Zoe
Resetting the range indicator of the Renault Zoe
Renault Zoe (2013-2024 / MK 1) In this video, we can see that if after performing a full recharge the indicator in the Renault Zoe's dashboard displays a very low range, we can try…
How to disassemble the glove compartment drawer of the Renault Zoe
How to disassemble the glove compartment drawer of the Renault Zoe
Renault Zoe (2013-2024 / MK 1) Today's main steps will show us how to disassemble and replace the glove box of the Renault Zoe, following the instructions below. First of all, we g…
How to remove the rear seats in the Renault Zoe?
How to remove the rear seats in the Renault Zoe?
Renault Zoe (2013-2024 / MK 1) In this tutorial we can see how to remove the rear seats in the Renault Zoe, an extremely simple and quick operation. First of all, we open both the …

Other guides you may be interested in

How to Replace the Engine Air Filter on a Peugeot Partner

The engine air filter for this car model is located at the rear of the engine bay, directly under the windscreen, in a central position: to access the filter housing, first remove the brake fluid reservoir; then you can unscrew the three front screws that secure the filter container cover, release the side latch, and complete the removal of the cover; then extract the old filter, remove any dirt residue, ensuring no impurities enter the intake, install the new filter ensuring the seal fits perfectly against the edges of the box, and refit the cover and brake fluid reservoir.

Watch the video!


by ScegliAuto

More videos