|
Do it yourself
| |||
| ||||
How to reset the BMS of the Renault Zoe
Model: Renault Zoe
MK 1
- Years 2013-2024
In this video we see how to reset the BMS of the Renault Zoe: but what is the BMS? BMS= Battery Management System which controls the battery charge status, remaining capacity, cell balancing, and estimated range, based on driving style and battery history. Why do we want to reset the BMS? Because it is believed to be showing incorrect range; or because the battery has been replaced in whole or in part, and because with the battery fully charged to 100% it does not show consistent values. The procedure to follow is as shown in the video: battery fully charged to 100%; turn off the car and wait 5 minutes, turn on the instrument panel and press both the brake and clutch pedals fully for about 15 seconds. Wait to hear a "click": it is the BMS resetting. Now turn off and turn on the car again. In the video, the range was 286 km before and 364 km after the reset. But we shouldn't do this operation too often, as it could generate less accurate estimates.
Posted on 26 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Renault Zoe
(2013-2024 /
MK 1)
In this tutorial, we can see how to reset the tire pressure warning light in the Renault Zoe, an extremely simple and quick operation, to be carried …
Renault Zoe
(2013-2024 /
MK 1)
In this tutorial we can see how to reset the service in the Renault Zoe, an extremely simple and quick operation, to be carried out only once all sch…
Renault Zoe
(2013-2024 /
MK 1)
These short and simple instructions will show us how to reset the multimedia system R-link of the Renault Zoe. First of all, we get on board the car …
Other guides you may be interested in
|
How to Check the Oil Level on a Jeep Renegade?
To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.459
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
