Do it yourself
Frequently asked questions about cars and motorcycles

Renault Zoe: How to Replace the 12V Auxiliary Battery in the Engine Bay

Model: Renault Zoe MK 1 - Years 2013-2024
Part: Battery

On the Renault Zoe, the 12 Volt auxiliary battery is located in the engine bay, at the top right, under the large blue cover for the electrical components. After opening the bonnet, lift and move the blue cover by loosening the metal bracket to completely free the battery. Connect a specific battery tester to the terminals to check its condition, as shown in the video. Once the check is complete, proceed to dismantle: detach the windscreen washer fluid reservoir by pulling it forward from its clips to create more space in front of the battery. At this point, the battery can be removed from its housing, revealing the plastic support base; inspect it and remove any debris. Outside, compare the old battery with the new replacement battery, checking dimensions, capacity, and terminal positions. Finally, lower the new battery into the bay in place of the old one, align it against the base, and reassemble the support, blue cover, and washer reservoir in order. Once completed, the engine bay of the Renault Zoe returns to its original configuration with the 12V auxiliary battery replaced.

Posted on 16 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Renault Zoe (2013-2024 / MK 1) The Renault Zoe tends to alarm owners with messages like "check electrical system". The most likely cause is a flat or faulty 12V auxiliary battery, …
Renault Zoe (2013-2024 / MK 1) In this video, you will see some tips for easily changing the 12-volt battery of the Renault Zoe ZE, which is seemingly located in a hard-to-reach sp…
Renault Zoe (2013-2024 / MK 1) To replace the front headlamp bulb on the Renault Zoe, open the bonnet to access the components inside the engine bay: inside the corresponding headl…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos