Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to calculate the degradation of the Renault Zoe battery

Model: Renault Zoe MK 1 - Years 2013-2024
Part: Battery

In this video we can see how to calculate the degradation of the traction battery of the Renault Zoe: first we need to charge the battery to 100% and keep the driver's door open. Then we put our feet on both pedals pressing them all the way down, and then press the lower button located on the satellite on the right side of the steering wheel. Keep it pressed for a moment, this way we will perform a reset. Let's see what appears on the dashboard: compared to the full charge which would be 124 miles, there is a charge of 112 miles. The car has already traveled over 28,000 miles in its three years of life, so the remaining life of the battery has already decreased by almost 10%.

Posted on 8 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Renault Zoe remote control?
How do you replace the battery of the Renault Zoe remote control?
Renault Zoe (2013-2024 / MK 1) To replace the battery of the Renault Zoe remote control, you need to use an object to pry open the key from the top of the device: once this is remo…
How to check the battery status of the Renault Zoe
How to check the battery status of the Renault Zoe
Renault Zoe (2013-2024 / MK 1) In this short guide, we will see the information that will allow us to check the status and parameters of the Renault Zoe battery. In order to check …
How do you replace the battery of the Renault Zoe remote control?
How do you replace the battery of the Renault Zoe remote control?
Renault Zoe (2013-2024 / MK 1) The battery of the Renault Zoe remote control can be replaced by levering the rear panel of the device so that it is pushed out: once the removal has…

Other guides you may be interested in

How to Replace the Diesel Filter of the Peugeot 3008 1.5 BlueHDI

Briefly, we will see the main instructions for dismantling and replacing the diesel filter of the Peugeot 3008 1.5 BlueHDI. First, locate the diesel filter under the vehicle, so it will be necessary to lift it; then disconnect the electrical connector and the fuel lines from the filter, unscrewing the side screws to remove the cartridge, as shown in the video. At this point, replace the diesel filter with the new one, as well as with the original one; then reconnect the pipes and the electrical connector, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos