Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Traction Battery of the Renault Zoe

Model: Renault Zoe MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Battery

Video tutorial

Follow the steps to remove and replace the traction battery of the Renault Zoe, as outlined below. First, lift the vehicle and position the suitable jack under the battery; then, undo all the securing screws and disconnect the wiring to remove it from the floorpan, as shown in the video.

At this point, replace the battery with the new one, as well as with the original; then reconnect the battery wiring and finally secure it to the vehicle's chassis!


Updated on 21 August 2026 by ScegliAuto


Related tutorials

How to Calculate Battery Degradation of the Renault Zoe
How to Calculate Battery Degradation of the Renault Zoe
Renault Zoe (2013-2024 / MK 1) In this video, you will see how to calculate the degradation of the traction battery of the Renault Zoe: first, charge the battery to 100% and keep t…
What Do the Messages "Electrical Fault Danger/Engine Fault" Mean on Renault Zoe
What Do the Messages "Electrical Fault Danger/Engine Fault" Mean on Renault Zoe
Renault Zoe (2013-2024 / MK 1) These concerning messages are primarily caused by a weak 12V battery. In this case, the vehicle may get stuck in "P", show false errors on ABS, airba…
How to check the battery status of the Renault Zoe
How to check the battery status of the Renault Zoe
Renault Zoe (2013-2024 / MK 1) In this short guide, we will see the information that will allow us to check the status and parameters of the Renault Zoe battery. In order to check …

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos