Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Coolant in the Roewe Rx8?

Model: Roewe Rx8 MK 1 - Years 2018-2026
Part: Antifreeze coolant

You can drain and replace the coolant in your vehicle by following the instructions below: open the hood and raise the front of the car. This operation must be performed with the engine off and cold. Open the coolant filler cap, and locate the drain plug under the vehicle. Unscrew this plug only after positioning a container to catch the used fluid. Before refilling the system with new fluid, you can flush the system with water. After flushing, re-screw the drain plug, fill the reservoir with new fluid, and replace the reservoir cap.

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Grille of the Roewe RX8?
How to Replace the Front Grille of the Roewe RX8?
Roewe Rx8 (2018-2026 / MK 1) To replace the front grille of the Roewe RX8, open the hood to access the screws securing the grille from the top. After loosening these screws, you …
How to Replace Oil and Filter on a Roewe Rx8?
How to Replace Oil and Filter on a Roewe Rx8?
Roewe Rx8 (2018-2026 / MK 1) To replace the oil and filter on the vehicle, follow these steps: open the hood and lift the car, locate the drain plug on the side of the oil pan an…
How to DIY Change the Engine Oil on a Roewe Rx8?
How to DIY Change the Engine Oil on a Roewe Rx8?
Roewe Rx8 (2018-2026 / MK 1) The entire procedure should take about 45 minutes and must be performed with the vehicle parked on a perfectly level surface or, better yet, on jack …

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos