Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Roewe
  4. :
  5. Rx8
  6. : How to change the oil and filter on the Roewe Rx8?

Roewe Rx8 - Video tutorial

Model: Roewe Rx8 MK 1 - Years 2018-2024
Part: Engine oil
Operation: How to change the oil and filter on the Roewe Rx8?

To be able to replace the oils and filter on the car it is necessary to proceed as follows: open the bonnet and lift the car, locate the system drainage cap on the side of the oil pan and unscrew it, open and then also the filler cap. Identify the diesel filter located at the rear of the engine and unscrew it too with a socket wrench. Take the new filter and screw it on the seat after replacing the o-ring. Screw the drain plug back on and top up 4.5 liters of oil (always first check the lubricant specifications provided by the manufacturer.


Posted on 5 May 2024 by ScegliAuto

Other guides that may interest you

How to open the bonnet of the Volkswagen Polo

Let's see in this short and simple guide the instructions that will allow us to open the bonnet of the Volkswagen Polo. First of all we open the front door, on the driver's side, and start pulling the opening lever of the engine hood, in order to open the lock; then let's move to the front of the vehicle and unhook the tab that we find on the central part, above the manufacturer's emblem, as shown in the video. At this point we block the bonnet with the lateral rod; then we accompany the bonnet down to close it again!

Watch the video!


by ScegliAuto

More videos