Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Saab
    3. :
  3. 9 5
    4. : Replacing the injection cassette

Saab 9 5 - Video tutorial

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Injectors
Operation: Replacing the injection cassette

The following video tutorial demonstrates how to replace the ignition cassette on a Saab 9-5. The operation takes very little time. The injection cassette is locked by four screws which must be removed with a screwdriver or a Phillips screwdriver. With a small flat-tip screwdriver disconnect the electrical connection, then lift and remove the box and replace it with the new one which will be positioned in the same way as the one just replaced. Lastly, replace the four screws that lock the ignition box and screw them back.


Posted on 5 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos