Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Dismantling Saab 900 Hood

Model: Saab 900 MK 2 - Years 1993-1998
Part: Convertible top

Once the hood is fully opened, start by removing the trim that secures the rear of the cover: this is a strip that covers the entire edge of the hood and is fixed with several screws; all screws must be undone: take care not to damage the heads of the screws, which may be rusty. Once the trim is removed, take off the front strip that covers the front edge of the cover: simply pull it off. At this point, lift the hood slightly, just enough to allow the rear windows to come out and slide off the seals of the window frame. Finally, undo the fixing screw of the metal cap (it may also be riveted).

Updated on 7 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Saab 900S soft top motor disassembly guide
Saab 900S soft top motor disassembly guide
Saab 900 (1993-1998 / MK 2) Let's see in this guide the main instructions for disassembling and replacing, or repairing, the motor of the hood of the Saab 900. First we open the…
Disassembly of disc brake pads on Saab 900
Disassembly of disc brake pads on Saab 900
Saab 900 (1993-1998 / MK 2) Let's replace the front brake pads of a Saab 900, let's see how they change. We lift the car on a jack up to the desired height, immediately after we…
Disassembly and reassembly of the bumper on the Saab 900 DIY
Disassembly and reassembly of the bumper on the Saab 900 DIY
Saab 900 (1993-1998 / MK 2) The procedure involves the removal of the bumper from the Saab 900 with the vehicle secured and the ignition off. It starts by identifying the visibl…

How to Remove the Front Seats from a Classic Fiat 500

How to remove the front seats from a classic Fiat 500? In this video, follow these steps: first, slide the seats forward and lift them up, then unscrew the retaining bolts on the rails fixed to the car's chassis using a socket or impact driver (use appropriate release agents if the bolts do not unscrew). Remove the retaining bolts at the bottom of the car (use spanners on both the upper and lower parts of the connecting bolts). Finally, install the new front seat by following the disassembly steps mentioned earlier.

Watch the video!


by ScegliAuto

More videos