Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Saab 900 instrument cluster bulb replacement

Model: Saab 900 MK 1 - Years 1979-1994
Part: Instrument cluster

Do we want to replace the bulbs from inside the instrument panel? Let's see how the instrument panel is removed. Unscrew the tightening screws located under the car radio until it is released from the dashboard. Now, let's remove the car radio from the dashboard, disconnect the various power supply terminals located in the rear part of the same and the antenna reception cable. We extract the piece out of the seat. Unscrew the tightening screws on the entire surface of the instrument panel (upper and lower). After removing the screws, we can remove the entire cover of the instrument panel. We disassemble the picture and replace the bulbs.

Posted on 4 January 2022 by ScegliAuto

Video tutorial

Related tutorials

Disassembly of disc brake pads on Saab 900
Disassembly of disc brake pads on Saab 900
Saab 900 (1993-1998 / MK 2) Let's replace the front brake pads of a Saab 900, let's see how they change. We lift the car on a jack up to the desired height, immediately after we…
Saab 900S soft top motor disassembly guide
Saab 900S soft top motor disassembly guide
Saab 900 (1993-1998 / MK 2) Let's see in this guide the main instructions for disassembling and replacing, or repairing, the motor of the hood of the Saab 900. First we open the…
Instructions for Dismantling Saab 900 Hood
Instructions for Dismantling Saab 900 Hood
Saab 900 (1993-1998 / MK 2) Once the hood is fully opened, start by removing the trim that secures the rear of the cover: this is a strip that covers the entire edge of the hood…

Other guides you may be interested in

How to Replace the Fan Resistor on a Renault Scenic

How to replace the fan resistor on a Renault Scenic. In this video, learn how to perform the disassembly: use a lever to remove the plastic under the glove compartment, and unscrew the cover (where the resistor is located) with a screwdriver. Disconnect the large connector of the resistor, then pull it out from the cabin. Insert a new fan resistor (connect the power connector). Finally, refit the cover and tighten the screws. Check the correct assembly of the previously fitted parts and test the correct operation of the fan.

Watch the video!


by ScegliAuto

More videos