Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Intake Manifold Gasket

Model: Saab 9 5 MK 1, Ys3e - Years 1997-2010
Part: Engine

Before proceeding with the installation of the intake manifold gasket, ensure that there are no dirt or residue on either the cylinder head side or the manifold side; then apply the new gasket and secure the intake manifold to the cylinder head by tightening the respective fixing studs with the appropriately calibrated torque wrench. The gasket is made of paper: it consists of cellulose fibres generally reinforced with plasticised gels that make it resistant to oils and fuels as well as high temperatures; it can also be used for water pumps and crankcases.

Updated on 12 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Exhaust Manifold Gasket
Replacing Exhaust Manifold Gasket
Saab 9 5 (1997-2010 / MK 1, Ys3e) Once you have removed the exhaust manifold and the old gasket, clean the gasket seating thoroughly, both on the head and on the manifold, to eliminat…
Replacement of the Complete Engine Gasket Kit
Replacement of the Complete Engine Gasket Kit
Saab 9 5 (1997-2010 / MK 1, Ys3e) First, check with a feeler gauge and an aluminium bar for any tolerances on the seating surface of the cylinder head as shown in the images. Use the …
Guide to Replacing the Cylinder Head Gasket
Guide to Replacing the Cylinder Head Gasket
Saab 9 5 (1997-2010 / MK 1, Ys3e) The gasket is a component that fits between the flat surfaces of two joined parts. Usually, these gaskets can become damaged due to severe overheatin…

Other guides you may be interested in

How to Change the H7 Headlight Bulb on an Audi A3

When replacing the front headlight bulbs, choosing the right bulbs is certainly the first hurdle to overcome: halogen, blue white light, xenon, or LED. Once you have made your choice, installing the new bulb can be done without removing the headlight. Simply open the front bonnet, locate the protective cap of the bulb holder, and press on the corresponding latch to remove it. Then grasp the bulb's power connector and pull it out along with the bulb itself, disconnect the connector, fit the new bulb, and press it into its seat until it clicks into place.

Watch the video!


by ScegliAuto

More videos