Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the pollen filter on a Saab 9-5 TTiD.

Model: Saab 9 5 Ys3g, MK 2 - Years 2010-2012
Part: Cabin air filter

In this video tutorial, we can see how it's possible to replace the pollen filter on a 2011 Saab 9-5 TTiD, following a few simple steps. The first thing to do is to purchase a new pollen filter. The second step is to get inside the car, turn off the engine, and engage the handbrake. The cabin filter on this car is located behind the glove box, so you need to open the glove box and remove all the material inside. Then, you need to unscrew the four bolts located in the corners of the glove box with a 7mm socket wrench. Once the glove box is removed, you'll find the filter box, and you need to open its cover and remove the filter from its seat. Position the new filter following the arrows on the filter itself.

Posted on 23 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the antenna of the Saab 9-5
How to replace the antenna of the Saab 9-5
Saab 9 5 (2010-2012 / Ys3g, MK 2) The steps to replace the roof antenna of a Saab 9-5 car are simple and quick to perform independently. The first step is to check that no water has e…
Saab 9-5 brake pads replacement
Saab 9-5 brake pads replacement
Saab 9 5 (1997-2010 / Ys3e, MK 1) In today's video we will see how to remove and replace the brake pads of a Saab 9-5. First we go to disassemble the wheel by unscrewing the bolts wit…
Removing the door panel on the saab 9 3
Removing the door panel on the saab 9 3
Saab 9 5 (1997-2010 / Ys3e, MK 1) We replace the panel covering the car door if it is damaged. Let's see the disassembly. We disconnect the terminals of the supply battery. With a scr…

How to Replace the Boot Compartment Light Bulb on a Peugeot 208

If you want to improve visibility inside the boot compartment, it is recommended to replace the original incandescent bulb with a LED type (T10 fitting); once the rear hatch is opened, locate the bulb holder positioned on the side, near the shock absorber dome, where the plastic grille is located. Then, lever the retaining tab to extract the bulb holder, disconnect the power connector, and remove the old bulb to replace it with the LED one; reconnect the power, check the correct operation of the bulb (if not, rotate it 180°), and reposition the bulb holder in its place.

Watch the video!


by ScegliAuto

More videos