Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Brake Pads on Saab 9-5

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Brake pads

In today's video, you will learn how to remove and replace the brake pads on a Saab 9-5. First, remove the wheel by unscrewing the bolts with a spanner and lifting the car with a jack. Then, unscrew the rear bolts of the caliper with a spanner and remove it. At this point, you can take out the old pads and replace them with new ones. Before refitting everything, clean the braking area of any remaining debris and insert the caliper while pushing the piston back with force. Refit the caliper bolts and finally the wheel!

Updated on 22 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads
Replacing Front Brake Pads
Saab 9 5 (1997-2010 / Ys3e, MK 1) Loosen the wheel nuts and lift the vehicle securely. Remove the bolts and take off the wheel. Using a screwdriver and hammer, push out the two clips …
Replacing the Third Brake Light on a Saab 9-5
Replacing the Third Brake Light on a Saab 9-5
Saab 9 5 (1997-2010 / Ys3e, MK 1) How do you remove the third brake light on a Saab? Let's look at how to detach the light located in the tailgate of the car. Lift the tailgate, then …
Replacement of Rear Brake Pads
Replacement of Rear Brake Pads
Saab 9 5 (1997-2010 / Ys3e, MK 1) Loosen the wheel nuts and lift the vehicle, securing it safely. Unscrew the bolts and remove the wheel. Using a screwdriver and hammer, push out the …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos