Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of Rear Brake Pads

Model: Saab 9 5 Ys3e, MK 1 - Years 1997-2010
Part: Brake pads

Loosen the wheel nuts and lift the vehicle, securing it safely. Unscrew the bolts and remove the wheel. Using a screwdriver and hammer, push out the two clips of the brake shoe spring. Check the brake fluid level and ensure it is not at maximum. Using a plastic tool, remove the brake pads from their seat. Install the new pads, paying attention to the rotation direction stamped on the body. Before removing the inner pad, disconnect the electrical contact via its connector. Remove the second pad and install the new one, reconnecting the wires. Refit the spring and the two clips. Refit the wheel. Recheck the brake fluid level. Reset the position of the pistons by pressing the brake pedal.

Updated on 8 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Brake Pads on Saab 9-5
Replacing Brake Pads on Saab 9-5
Saab 9 5 (1997-2010 / Ys3e, MK 1) In today's video, you will learn how to remove and replace the brake pads on a Saab 9-5. First, remove the wheel by unscrewing the bolts with a spann…
Replacing Front Brake Pads
Replacing Front Brake Pads
Saab 9 5 (1997-2010 / Ys3e, MK 1) Loosen the wheel nuts and lift the vehicle securely. Remove the bolts and take off the wheel. Using a screwdriver and hammer, push out the two clips …
Fuel Pump Replacement Instructions
Fuel Pump Replacement Instructions
Saab 9 5 (1997-2010 / Ys3e, MK 1) If the car engine does not start, it is likely that fuel is not reaching the engine due to a failure of the submerged pump located in the fuel tank: …

Other guides you may be interested in

How to Reset the Central Locking of the Volkswagen Golf 4?

If the central locking system of the Volkswagen Golf 4 is not working, it is likely necessary to reset the system: to do this, open the driver's door and detach the side panel of the dashboard next to the steering wheel. Under this panel, you will find the fuses, including the one for the central locking, which is indicated in the manual as number 14. To reset the system, remove this fuse from its housing, then reinsert it or replace it with a new one of the same amperage: this will reset the central locking system.

Watch the video!


by ScegliAuto

More videos