Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil on the Samsung Qm3

Model: Samsung Qm3 MK 1 - Years 2013-2019
Part: Engine oil

Let's see below how it is possible to change the engine oil on this model of car: first open the bonnet and unscrew the oil filler cap, then lift the car and access under the engine compartment to remove the sound-absorbing panel fixing screws, then unscrew the oil drain plug located under the sump. Collect the used oil in a container, wait for all the oil to drain and restart the cap. Have at least 4.5 liters of oil with SAE 5W30 specification to fill the tank and finally restart the filler cap.

Posted on 21 April 2022 by ScegliAuto

Video tutorial

Related tutorials

How to replace the cabin filter in the Samsung QM3?
How to replace the cabin filter in the Samsung QM3?
Samsung Qm3 (2013-2019 / MK 1) Replacing the cabin filter in the Samsung QM3 is an extremely simple and economical operation, let's see how to proceed in this tutorial. First of al…
How to replace the Samsung Qm3 battery
Samsung Qm3 (2013-2019 / MK 1) Let's see in this short guide the instructions needed to disassemble and replace the Samsung Qm3 battery. First we open the bonnet of our car and beg…
How to replace the cabin filter of the Samsung QM3?
How to replace the cabin filter of the Samsung QM3?
Samsung Qm3 (2013-2019 / MK 1) In order to replace the cabin filter of the Samsung QM3, you need to remove the panel on the left side of the footrest compartment on the front passe…

Other guides you may be interested in

How to Remove the Headlight Bulbs on a Toyota Rav4

Let's see how to remove the headlight bulbs on a Toyota Rav4. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap (if present) on the headlight and remove it (located at the rear of the headlight). At this point, you will find the bulbs with metal clips; pull the bulb holders out of the headlight and extract the damaged bulb using a screwdriver and pliers. Fit the new bulb (ensuring it is the correct type and size), insert the bulb holder back into the headlight housing, and close the headlight with the inspection cap. Test the lights to ensure they are functioning correctly.

Watch the video!


by ScegliAuto

More videos