Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Samsung
    3. :
  3. Qm3
    4. : How to mount a steering wheel cover on Samsung Qm3

Samsung Qm3 - Video tutorial

Model: Samsung Qm3 MK 1 - Years 2013-2019
Part: Steering wheel
Operation: How to mount a steering wheel cover on Samsung Qm3

If we want to customize our car by installing a suede and carbon fiber steering wheel cover, we will find instructions on how to behave both in the video and in the description below. The first thing to do is to remove the steering wheel, then take the steering wheel cover purchased aftermarket and, using a plastic lever, insert the leather trim in the slot located all around the steering wheel. Then take a needle and the red thread that comes with the kit and sew the inside along the entire profile of the steering wheel.


Posted on 20 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos