Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the central tunnel of the Seat Ibiza 6L

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Center console tunnel

See other generations:
Video tutorial

In this video, we will see how to disassemble the central tunnel of the Seat Ibiza 6L: in this case, we need to replace the cigarette lighter socket, so it is necessary to disassemble the tunnel. First, we need to remove the frame of the gear shift boot, which is just snapped in. Once removed, we see that there are two torx screws that need to be removed; there are two more in the glove compartment on the rear side of the tunnel (some versions have a cup holder in the same place).

In any case, we remove the glove compartment or cup holder and remove the other two torx screws. We also remove the snap-in tray located under the handbrake.

At this point, we can remove the tunnel: the only difficulty is the electrical plug of the cigarette lighter, which must be disconnected before removing the body of the tunnel.


Posted on 8 December 2024 by ScegliAuto


Related tutorials

How to Remove the Gear Knob on a Seat Ibiza
How to Remove the Gear Knob on a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) How do you replace the gear knob with the leather gaiter on a Seat Ibiza? This video shows you how to do it. First, use a plastic lever to disconnect…
How to Replace the Heater Radiator in a Seat Ibiza?
How to Replace the Heater Radiator in a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To replace the heater radiator in a Seat Ibiza, you need to completely dismantle the car's dashboard. Start by removing the centre console, then proc…
…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos