Do it yourself
Frequently asked questions about cars and motorcycles

How to reset the "Service" light on a Seat Leon?

Model: Seat Leon KL1, KL8 - Years 2020-2026
Part: Service warning light

To reset the "Service" light on a Seat Leon, turn on the instrument panel without starting the engine. Using the buttons on the steering wheel, navigate through the onboard computer menu. Look for the "Vehicle" or "Settings" option, which will allow you to access maintenance information. Scroll until you find the "Service" or "Maintenance Interval" option, where you can select the reset option. Once found, follow the instructions displayed on the screen to confirm the reset of maintenance intervals. Usually, you will need to hold down the confirmation button for a few seconds until the display indicates that the reset has been completed. At this point, the "Service" light should turn off, indicating that the maintenance interval has been correctly updated. This process is important to ensure that the onboard system properly monitors the vehicle's future maintenance needs. If the reset is not successful immediately, repeat the steps carefully until you achieve the desired result.

Posted on 2 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Seat Leon (2005-2013 / 1P) Let’s follow the author of this video to reset the service light on a Seat Leon MK2, which is the second model. Follow these steps: 1) locate the odo…
Seat Leon (2012-2019 / MK 3, 5F) To reset the "Service" light on a Seat Leon, start by turning on the instrument panel without starting the engine, by turning the key in the ignition…
Seat Leon (2005-2013 / 1P) The procedure to reset the service light in a Seat Leon begins with the vehicle turned off. Looking at the centre of the instrument panel, find a but…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos