|
Do it yourself
| |||
| ||||
How to replace the lock on the door of a Seat Ibiza 3
Model: Seat Ibiza
6J, 6P
- Years:
2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Video tutorial
In this video, we will see how to change the door lock of a Seat Ibiza 3: we start by removing the inner panel from the door. We will begin by removing the cover from the handle, and then we will remove the two screws inside, then we remove the two screws under the cover; at this point, we can release the clips and remove the panel, disconnecting the electrical connectors. We secure the glass to the pillars with body shop tape so it doesn't fall, and unscrew the mechanism underneath it. Now, from the thickness of the door, we unscrew the screw that holds the handle, then the screws of the lock, always in the thickness of the door. We remove all the electrical cables and connectors and remove the metal panel on which the window lifter and lock are fixed, which we can finally remove from the panel and replace with the one we have found, for example on tarostrade. It is code 2002-2008-191563 at 16.43 euros + 6.49 euros for shipping. Now we have to put the lock back on the panel and reconnect it via the electrical connector. We will reassemble the panel on the door by reattaching all the electrical wires and connectors and then tighten the glass support bolt, and put the lining panel back in place. Of course, it was not a very simple job, but it was a great satisfaction to be able to do it.
Posted on 28 May 2025 by ScegliAuto
Related tutorials
Seat Ibiza
(2002-2009 /
6L)
With the help of the following video tutorial, we will explain how to replace the lock of the Seat Ibiza, model 6l. To perform the lock replacement, …
Seat Ibiza
(2002-2009 /
6L)
To replace the door lock on a Seat Ibiza, you first need to remove the door panel: to detach the panel, unscrew the screws located under the trim of …
Seat Ibiza
(2008-2017 /
6J, 6P)
If one of the front indicators on your Seat Ibiza has stopped working and you want to learn how to replace it correctly and safely, just read this gu…
Other guides you may be interested in
|
How to Reset the Tire Pressure Light on a MG ZS?
On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.045
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |