Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to repair the door lock of a Seat Ibiza 6J/6P

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Door lock

In this video, we will see how to repair the lock of a Seat Ibiza 6J/6P. To access the lock, we will need to remove the inner middle panel; we will then need a torx screwdriver, a small drill, a plastic spatula, and WD-40. We start by removing the plastic cover of the handle, under which we find screws that need to be removed. Once those are removed, we pry on the middle part of the panel to remove it, until we find the electrical connector for the windows. Disconnect it and remove the panel. We have now exposed the lock. We make a small hole with the drill on the outer side of the lock, in a safe spot, and then insert the WD-40 nozzle and spray generously. Let it work and then test the lock before putting the panel back in place.

Posted on 17 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Door Lock on a Seat Ibiza?
How to Replace the Door Lock on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To replace the door lock on a Seat Ibiza, you first need to remove the door panel: to detach the panel, unscrew the screws located under the trim of …
How to replace the door lock of the Seat Ibiza
How to replace the door lock of the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) With the help of the following video tutorial, we will explain how to replace the lock of the Seat Ibiza, model 6l. To perform the lock replacement, …
Information on the Fuse Diagram of the Seat Ibiza 6J
Information on the Fuse Diagram of the Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6P, 6J) This video provides information regarding the fuses of the Seat Ibiza; these are shown on a specific diagram. The fuses of the Seat Ibiza are located…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos