Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service on a Seat Alhambra

Model: Seat Alhambra MK 2 - Years 2010-2020
Part: Fuse box

In this tutorial, we will see how to reset the service on a Seat Alhambra, a very simple and quick operation to perform only after completing all scheduled maintenance tasks. First, enter the cabin and insert the key, leaving it in the initial position, then activate the hazard lights. Press and hold the "0.0/SET" button located on the right side of the dashboard. At the same time, turn on the instrument panel and, on the screen that appears, select "OK". Repeat the procedure with the hazard lights off to reset the oil service.

Posted on 25 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on the Seat Alhambra
How to reset the service light on the Seat Alhambra
Seat Alhambra (2010-2020 / MK 2) To reset the service light, related to the maintenance, on a 2015 Seat Alhambra vehicle, we need to keep the instrument panel off and insert the key …
How to Reset the Service Light on a Seat Alhambra
How to Reset the Service Light on a Seat Alhambra
Seat Alhambra (2010-2020 / MK 2) Let’s see how to reset the service light on a Seat Alhambra: to reset the oil service: Insert the key into the ignition, hold down the "set" button l…
How to Reset the Service Light on a Seat Alhambra?
How to Reset the Service Light on a Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) You can completely erase the Service light on a Seat Alhambra by holding down the 0.0/SET button located on the right side of the instrument cluster …

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos