Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Seat
  4. :
  5. Ibiza
  6. : How to disassemble the car stereo of Seat Ibiza

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: Car stereo
Operation: How to disassemble the car stereo of Seat Ibiza

The disassembly of the original car radio on this car model is carried out in a very simple way: it is basically a matter of removing the frame applied to interlocking just around the car radio itself; to carry out this operation it is suggested to use a plastic spatula for body shops or a thin screwdriver to the tip of which to apply paper tape to avoid damaging the edges of the frame; once removed it is possible to access the fixing screws of the radio which must be removed in order to be able to extract the radio itself from its seat and finally disconnect the relative sockets.


Posted on 15 November 2023 by ScegliAuto



How to disassemble the Seat Ibiza car stereo
Seat Ibiza (2008-2017 / 6P, 6J) Do you want to replace the car radio on your Ibiza? Well, you are in the right place. I'll tell you how to do it step by step. I recommend that you g
How to disassemble the car radio of a Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Is the Seat Ibiza car radio to be replaced? Let's see how it is disassembled with the removal keys. We detach the car radio trim frame with a plastic
How to replace the car stereo of the Seat Ibiza 6j
Seat Ibiza (2008-2017 / 6P, 6J) The guide shows how to replace the Seat Ibiza 6j car radio. The first step is to remove the unitâ € ™ s finishing mask using a plastic lever. Unscrew

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos