Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on the Seat Alhambra

Model: Seat Alhambra MK 2 - Years: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Tire pressure warning light

See other generations:
Video tutorial

Below you will find instructions on how to reset the warning light indicating a tyre pressure anomaly in your Seat Alhambra. As we can see in this short video, with the ignition on, press and hold the "set" button on the lower control panel located centrally in the car. Hold the button for a few seconds until the reset is complete.

As always, it is advisable to check the tyre pressure, and if the problem persists, consult an expert to avoid more serious issues and ensure your safety and that of others.


Posted on 30 May 2026 by ScegliAuto


Related tutorials

How to reset the tyre warning light on the Seat Alhambra?
How to reset the tyre warning light on the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) In this tutorial, you will learn how to reset the tyre warning light on the Seat Alhambra. This operation is extremely simple and quick, to be perfor…
How to reset the tire pressure light in the Seat Alhambra?
How to reset the tire pressure light in the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) In this tutorial, we can see how to reset the tire pressure light in the Seat Alhambra, an extremely simple and quick operation, to be done only once…
How to Reset the Tyre Warning Light in the Seat Alhambra?
How to Reset the Tyre Warning Light in the Seat Alhambra?
Seat Alhambra (2010-2020 / MK 2) In this tutorial, you will see how to reset the tyre warning light in the Seat Alhambra, a very simple and quick operation to perform only after rest…

How to Open the Fuel Filler Flap in the Hyundai i30?

In this tutorial, you will learn how to open the fuel filler flap in the Hyundai i30, a very simple operation that follows the typical procedure of most vehicles. First, unlock the locks using the designated button on the remote, then open the driver's door, locate the release lever on the left side of the seat, and operate it. Next, move to the fuel filler flap, open it completely, unscrew the cap, and refuel as needed. To close the flap, simply press it gently.

Watch the video!


by ScegliAuto

More videos