Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Wiper Blades on the Seat Leon

Model: Seat Leon 1M - Years: 1999, 2000, 2001, 2002, 2003, 2004, 2005
Part: Windshield wipers

See other generations:
Video tutorial

On the SEAT Leon, start by positioning the wiper arms for easy access and lifting them away from the windscreen, so the blade is free and you can work without risking scratching the glass. The video clearly shows the central attachment of the blade: act on the small lock/tab to release it, and while holding it down, slide the blade off the arm following the direction of the fitting, without pulling sharply.

After removing the first wiper blade, take the new blade for the SEAT Leon and perform the reverse operation: align the attachment, slide it onto the arm, and push until it clicks back into place, indicating it is securely locked. At this point, lower the arm back onto the glass gently.


Posted on 17 August 2026 by ScegliAuto


Related tutorials

How to replace the front windshield wipers of the Seat Leon
How to replace the front windshield wipers of the Seat Leon
Seat Leon (2012-2019 / 5F, MK 3) The instructions in this guide will show us how to disassemble and replace the front wipers of the Seat Leon. First, let's move to the front of the c…
Can the tyre pressure reset be done in the Seat Leon?
Can the tyre pressure reset be done in the Seat Leon?
Seat Leon (2005-2013 / 1P) Noticing the tyre warning light on a vehicle means there is a specific issue with the inflation pressure, mainly due to a puncture, a flat tyre, or, …
Where are the fuses located in the Seat Leon?
Where are the fuses located in the Seat Leon?
Seat Leon (2012-2019 / 5F, MK 3) The fuses in the Seat Leon are divided between two fuse boxes located within the vehicle: the first is positioned inside the cabin. This is found low…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos