Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Number Plate Bulb on a Seat Ibiza

Model: Seat Ibiza 6P, 6J - Years 2008-2017
Part: License plate light

In this video, learn how to replace the number plate bulb on a Seat Ibiza. Use a screwdriver to remove the number plate light unit located in the rear bumper of the car. Once the light unit is removed, extract the bulb holder, then disconnect the bulb from it (as shown in the video). Fit the new bulb (same size and voltage) into the bulb holder; reassemble the light unit into the boot lid by pressing it in until the clips lock automatically. Test the correct operation of the previously installed bulb.

Updated on 12 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Seat Ibiza (2008-2017 / 6P, 6J) Is the number plate light not working anymore? Let's see how to remove the number plate bulb on a Seat Ibiza. Use a plastic lever to remove the numbe…
Seat Ibiza (2008-2017 / 6P, 6J) .. How to replace the number plate bulb on a Seat Ibiza? Follow this video to see how to replace the part... …
Seat Ibiza (2008-2017 / 6P, 6J) The Seat Ibiza has two bulbs (both 5W5) for the number plate light, but the replacement procedure is the same. Using a flat screwdriver, lever in the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos