Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on a Seat Leon

Model: Seat Leon 1M - Years 1999-2005
Part: Warning light – error code

Learn how to reset the service light that appears on the display of the instrument cluster of a Seat Leon. Turn on the instrument cluster with the appropriate remote key; check that the service light is solidly illuminated. Turn off the instrument cluster, press the button on the right of the instrument cluster firmly (simultaneously turn the button to the left). Turn off and turn on the instrument cluster again with the key: the reset confirmation will appear along with the car's mileage on the display. Turn off the instrument cluster with the key after completing the vehicle settings. Repeat the operation if it was not successful.

Updated on 30 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light in a Seat Leon?
How to Reset the Service Light in a Seat Leon?
Seat Leon (2005-2013 / 1P) The procedure to reset the service light in a Seat Leon begins with the vehicle turned off. Looking at the centre of the instrument panel, find a but…
How to Reset the Service Light on the Seat Leon?
How to Reset the Service Light on the Seat Leon?
Seat Leon (2005-2013 / 1P) In this tutorial, you will see how to reset the service light on the Seat Leon, a very simple and quick operation to perform only after completing al…
How to Reset the Service Light on a Seat Leon
How to Reset the Service Light on a Seat Leon
Seat Leon (2005-2013 / 1P) To clear the service light displayed on the instrument cluster of the Seat Leon, press and hold the button located in the centre of the cluster until…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos