Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Leon
    4. : How to reset the service warning light on Seat Leon

Seat Leon - Video tutorial

Model: Seat Leon 5F, MK 3 - Years 2012-2019
Part: -board computer
Operation: How to reset the service warning light on Seat Leon

Do you have a Seat car and the service warning light comes on? Do you want to reset it? If so, I'll tell you how to do it right away. Whether you have an Arona, a Leon, an Ibiza or another Seat, the method is the same, and it consists of this (actually there are two methods, I recommend the simplest): with the ignition off, press and hold the button next to the speedometer for more than 5 seconds (you can also do it for 30 seconds, the important thing is that there are more than five). Turn on the ignition while you still have the button pressed, then release it. Now, turn that button to the right, and. The light has gone out! Please turn off the picture.


Posted on 25 January 2024 by ScegliAuto



How do you reset the Seat Leon Service light?
Seat Leon (2020-2024 / KL1, KL8) In order to reset the Seat Leon's Service warning light, you need to go and turn on the instrument panel by inserting the key and turning it: then yo
How to reset the Seat Leon service light
Seat Leon (2005-2013 / 1P) If you notice the appearance of the maintenance (or service) warning light when starting your 2009 Seat Leon even though you have already carried out
How to reset the service warning light on a Seat Leon FR
Seat Leon (2012-2019 / 5F, MK 3) Thanks to this short video tutorial we can see how to reset the service light on a Seat Leon FR, model produced from 2012 to 2019. The first thing to

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos