Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuses on a Seat Leon

Model: Seat Leon 1M - Years 1999-2005
Part: Fuse box

How do you remove the fuses on your Seat? Let's see how to remove the fuses if they are damaged. Open the door and enter the vehicle, then use a plastic lever to remove the cover located on the dashboard side. Use needle-nose pliers to pull out the damaged fuses located in the compartment. Once this is done, insert the new fuses into the appropriate slots in the compartment. Finally, close the fuse inspection box with the cover on the side of the dashboard. Test the correct operation of the electrical parts that previously did not work.

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Can the tyre pressure reset be done in the Seat Leon?
Can the tyre pressure reset be done in the Seat Leon?
Seat Leon (2005-2013 / 1P) Noticing the tyre warning light on a vehicle means there is a specific issue with the inflation pressure, mainly due to a puncture, a flat tyre, or, …
Where are the fuses located in the Seat Leon?
Where are the fuses located in the Seat Leon?
Seat Leon (2005-2013 / 1P) In the Seat Leon, all fuses are contained within the single fuse box installed in the vehicle: in this model, the box is located inside the dashboard…
Where is the Fuse Box on the Seat Leon 4?
Where is the Fuse Box on the Seat Leon 4?
Seat Leon (2020-2026 / KL1, KL8) If you are experiencing issues with one or more electrical components of your Seat Leon Mk4 (2020-2023) and intend to work on the relevant fuses, sim…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos