Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing windscreen wiper blades on the Seat Ibiza

Model: Seat Ibiza 6J, 6P - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Windshield wipers

See other generations:
Video tutorial

You usually realise it’s time to replace the windscreen wiper blades only when the rainy season starts, and you find yourself in the middle of a downpour with wipers that refuse to clear the windscreen. Keeping the wipers in good condition is very important, so during a wash, lift the wipers and check the condition of the rubber, which should be intact and free of cracks.

To replace the wipers on this Ibiza, first put them in rest mode, meaning in a vertical position, so you can lift the wiper arm without risking scratching the bonnet. Once the arm is lifted, press the plastic button to release the lock and remove the old blade; then insert the new one, aligning the guide and pushing it in until the locking mechanism clicks into place.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Wiper Blades on a Seat Ibiza?
How to Replace the Wiper Blades on a Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) To replace the wiper blades on a Seat Ibiza, lift the arms to which the blades are attached. Once lifted, angle the blades away from the arms. This w…
Where is the rear windscreen wiper fuse located in the Seat Ibiza?
Where is the rear windscreen wiper fuse located in the Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) If the rear windscreen wiper on your Seat Ibiza has suddenly stopped working, first check the status of the relevant fuse, whose location is indicate…
How to Change the Rear Wiper Blade on a Seat Ibiza
How to Change the Rear Wiper Blade on a Seat Ibiza
Seat Ibiza (1993-2002 / 6K) In this tutorial video, you will see how to replace the rear wiper blade on a Seat Ibiza when it is worn. On the back of the new wiper blade box, the…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos