Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Rear Light Bulbs on a Seat Ibiza MK2

Model: Seat Ibiza 6L - Years 2002-2009
Part: Tail light bulb

In this video tutorial, you will learn how to remove and replace the bulbs of the rear light on a second-generation Seat Ibiza. First, open the boot and unscrew the side fixing screws of the light unit; then, using a very thin plastic lever, remove the light as shown in the video. At this point, disconnect the electrical connector and unscrew the fixing screw of the bulb holder to access the bulbs; replace them with new ones of the correct type, and reassemble everything by applying the reverse procedure of disassembly!

Updated on 5 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Rear Headlamp Bulb of the Seat Ibiza
How to Change the Rear Headlamp Bulb of the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) In this guide, we will see the main instructions to remove and replace the bulbs of the rear headlamp of the Seat Ibiza. First, open the boot lid and…
Removing Headlight Bulbs on Seat Ibiza
Removing Headlight Bulbs on Seat Ibiza
Seat Ibiza (2008-2017 / 6P, 6J) Are the front headlight bulbs out? Here’s how to replace them on a Seat Ibiza. Open the front bonnet by pulling the lever located at the bottom right…
How to Replace the Rear Light Bulb on a Seat Ibiza?
How to Replace the Rear Light Bulb on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To replace the rear light bulb on a Seat Ibiza, lift the boot to access the screws next to the rear light. Once these screws are loosened, you can co…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos