Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cabin Fan in the Seat Ibiza?

Model: Seat Ibiza 6L - Years 2002-2009
Part: Blower motor

To replace the cabin fan in the Seat Ibiza, open the glove compartment to loosen the screws located under the flap at the top of the pillar. By loosening these screws, you can remove the upper part of the dashboard above the glove compartment, which contains the fan. This can be extracted after removing the fastening bolts and disconnecting the connector. Once the old fan is removed, insert the new fan, connecting it and securing it with the respective bolts.

Updated on 12 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Cabin Ventilation Fan on a Seat Ibiza
How to Remove the Cabin Ventilation Fan on a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Remove the cabin ventilation fan on a Seat Ibiza. The cabin ventilation fan is located behind the glove compartment: unscrew the securing bolts on ei…
How to Replace the Cabin Fan on the Seat Ibiza
How to Replace the Cabin Fan on the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) To replace the cabin fan on the Seat Ibiza, open the glove compartment on the passenger side. Once the compartment is open, unscrew the screws inside…
How to replace the heating fan resistor of a Seat Ibiza
How to replace the heating fan resistor of a Seat Ibiza
Seat Ibiza (2017-2026 / 6F, KJ) To replace the heater fan resistor of a Seat Ibiza car, you will need to follow the steps shown in the selected tutorial. Get into the car and locate…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos