Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Seat
    3. :
  3. Ibiza
    4. : How do you replace the passenger compartment fan on the Seat Ibiza?

Seat Ibiza - Video tutorial

Model: Seat Ibiza 6L - Years 2002-2009
Part: Interior blower
Operation: How do you replace the passenger compartment fan on the Seat Ibiza?

Replacing the passenger compartment fan on your Seat Ibiza is done by opening the glovebox located on the passenger side. Once the drawer has been opened, it will be necessary to unscrew the screws located inside it, so that the entire compartment can be completely removed. This will allow access to the components in the rear, by removing the locking bracket and the screws that fix the fan to its housing. Also disconnecting the appropriate connectors, it will be possible to remove the fan and replace it with a new spare part.


Posted on 6 December 2022 by ScegliAuto



Remove the passenger compartment ventilation fan on Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Remove the passenger compartment ventilation fan on Seat Ibiza. Remove the passenger compartment ventilation fan is located behind the glovebox: unsc
How do you replace the passenger compartment fan of the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In order to replace the passenger compartment fan of the Seat Ibiza, you have to open the glove box to be able to loosen the screws located under the
Replacement of the fan on the Seat Ibiza.
Seat Ibiza (2002-2009 / 6L) If we intend to replace the air conditioning system fan in our car, in the description below we will find all the necessary indications and steps to

    Frequently Asked Questions

    • Ibiza 2002-2009 - Where is the resistor of the interior fan of the Seat Ibiza year 2007? Read Answer

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos