Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the heating fan resistor of a Seat Ibiza

Model: Seat Ibiza KJ, 6F - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Air conditioning

See other generations:
Video tutorial

To replace the heater fan resistor of a Seat Ibiza car, you will need to follow the steps shown in the selected tutorial. Get into the car and locate the fan resistor, which is located under the dashboard on the passenger side, so you will need to open and remove the glove compartment to access the component to be replaced.

You will find a connector with wires that power the resistor, so press the safety tab and disconnect it. Then proceed to remove the old resistor by unscrewing the screws and insert the new one. Reconnect the electrical connector and reassemble the previously removed glove compartment.


Posted on 4 March 2025 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan in the Seat Ibiza?
How to Replace the Cabin Fan in the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) To replace the cabin fan in the Seat Ibiza, open the glove compartment to loosen the screws located under the flap at the top of the pillar. By loose…
How to Remove the Cabin Ventilation Fan on a Seat Ibiza
How to Remove the Cabin Ventilation Fan on a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Remove the cabin ventilation fan on a Seat Ibiza. The cabin ventilation fan is located behind the glove compartment: unscrew the securing bolts on ei…
Removing the Heating Radiator from a Seat Ibiza
Removing the Heating Radiator from a Seat Ibiza
Seat Ibiza (2002-2009 / 6L) In this tutorial video, you will see the main steps to remove the heating radiator from the cabin of a Seat Ibiza. First, remove the gear knob and it…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos