Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Heating Radiator from a Seat Ibiza

Model: Seat Ibiza 6L - Years 2002-2009
Part: Heater core

In this tutorial video, you will see the main steps to remove the heating radiator from the cabin of a Seat Ibiza. First, remove the gear knob and its surround, then unscrew the handbrake plastic cover screws using a Torx spanner. Next, remove the side plastic panel on the driver's side and take off the bracket by unscrewing the bolts: this will allow you to extract the heating radiator, which is located in a sort of box. Replace it and reassemble everything following the initial instructions from the video.

Updated on 27 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the cabin heating radiator of the Seat Ibiza?
How do you replace the cabin heating radiator of the Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In order to replace the heater radiator of the Seat Ibiza, you need to completely remove the dashboard of the car: you will need to start by removing…
Replacement of the cabin heating radiator of the Seat Ibiza
Replacement of the cabin heating radiator of the Seat Ibiza
Seat Ibiza (2002-2009 / 6L) Following today's instructions, we will see how to disassemble and replace the heater radiator of the Seat Ibiza. First of all, we open the front doo…
How to Install the Radiator Grille on a Seat Ibiza 6J
How to Install the Radiator Grille on a Seat Ibiza 6J
Seat Ibiza (2008-2017 / 6P, 6J) In this video, you will learn how to install the radiator grille on a Seat Ibiza 6J. First, remove the two push screws located at the top of the fron…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos