Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Refill AdBlue in a Seat

Model: Seat Seat Various
Part: AdBlue warning light

AdBlue is a special liquid introduced in recent years in cars equipped with Diesel engines. Its function is to reduce the pollution levels of these engines, so it is important to always maintain an optimal level of liquid in the respective tank. Below, we will discover how to refill it in Seat cars. First, you must completely turn off the car and park it on a flat surface. Then, go to the rear and open the tank flap. Locate the AdBlue cap, unscrew it, and pour the new AdBlue into the tank. Finally, screw the cap back on and close the flap.

Updated on 18 May 2026 by ScegliAuto

Video tutorial

Related tutorials

What does the AdBlue warning light indicate on a Seat vehicle?
What does the AdBlue warning light indicate on a Seat vehicle?
Seat Seat Various Seat models with diesel power are equipped with a fluid called AdBlue, an additive that helps reduce polluting emissions. Generally, it is not necess…
How to Change the Language of the On-Board Computer in a Seat?
How to Change the Language of the On-Board Computer in a Seat?
Seat Seat Various In this tutorial, we will see how to change the language of the on-board computer in a Seat, an extremely simple and quick operation. To proceed, you…
Resetting the trip meter on a Seat car
Resetting the trip meter on a Seat car
Seat Seat Various Resetting the trip meter on a Seat car is really straightforward, and we will demonstrate it now. To do this, simply turn on the instrument cluster (…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos