Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Seat Ibiza

Model: Seat Ibiza 6L - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Tail light

See other generations:
Video tutorial

To replace the rear light on this vehicle, refer to the tutorial video and the instructions below. After opening the boot, locate the fixing screws inside the light unit.

Pull the light assembly outwards to remove it completely, then disconnect the electrical connectors located at the back. Take the new light assembly and position it in the housing, then reconnect the rear connectors and reattach the fixing screws.


Updated on 29 May 2026 by ScegliAuto


Related tutorials

How to Change the Rear Light on a Seat Ibiza
How to Change the Rear Light on a Seat Ibiza
Seat Ibiza (2008-2017 / 6J, 6P) Replace the damaged rear light on a Seat Ibiza if you need to change the bulbs inside it. Open the boot, unscrew the large plastic nut (located above…
How to Remove the Rear Light on a Seat Ibiza?
How to Remove the Rear Light on a Seat Ibiza?
Seat Ibiza (2002-2009 / 6L) In this tutorial, you will see how to remove the rear light on a Seat Ibiza 6L, a very simple and quick operation. Before proceeding, ensure the key …
How to Replace the Front Wing of the Seat Ibiza?
How to Replace the Front Wing of the Seat Ibiza?
Seat Ibiza (2008-2017 / 6J, 6P) To replace the front wing of the Seat Ibiza, first open the bonnet to loosen the screws securing the corresponding headlamp, completely removing it f…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos